HPLC Detectors

The Series 1260 Diode Array Detector includes deuterium and tungsten lamps along with 1024 diodes and 1-nm slit to provide expanded detection range with high spectral resolution. Unit also features electronic temperature control, reference wavelength, and upgradeability to 80 Hz sampling rate.

Available with 9 analytical and preparative flow cells

The 1260 Series Evaporative Light Scattering Detector (ELSD) is a powerful tool for sensitive detection of any compound that is less volatile than the mobile phase. It provides an essentially universal measurement under isocratic and gradient conditions not dependent on a compound´s absorbance, fluorescence, or electroactivity.

The 1260 Series Fluorescence Detector provides automatic optimization of PMT gain setting and improved selectivity and sensitivity by simultaneous multiple wavelength detection. Detector contains built-in diagnostics tools to minimize downtime; and built-in wavelength calibration for GLP compliance. Whether you choose the handheld instant pilot, or EZChrom Elite with extended data analysis capabilities, the Model 1260 Infinity Series Fluorescence Detector is easy to set up, use and maintain.

AGG4208A Instant Pilot Control Module for Stand-alone control.

The ideal detector for fast and reliable HPLC results when analyzing non-UV-absorbing substances, such as carbohydrates, lipids and polymers. This is also the detector of choice for gel permeation chromatography.

The 1260 Series variable wavelength detector provides improved detection limits with electronic temperature control, programmable wavelength switching, stop-flow wavelength scanning, and extensive diagnostics and error detection. Lower your cost of ownership with easy front access to lamp and flow cell for fast replacement. The built-in holmium oxide filter for automatic wavelength verification helps with GLP compliance.

Available with full range of flow cells.

The Lab Index 2000L Differential Refractive Index Detector offers the sensitivity, stability and reproducibility required for optimum RI detection. The thermally shielded optics, a countercurrent heat exchanger and its user-programmable temperature control result in an extremely stable baseline and an optimal Signal/Noise ratio.

The Lab Index 2000 Differential Refractive Index Detector offers the sensitivity, stability and reproducibility required for optimum RI detection. The thermally shielded optics, a countercurrent heat exchanger and its user-programmable temperature control result in an extremely stable baseline and an optimal Signal/Noise ratio. The 2000P model includes a Prep Cell.